3D printing materials
Nylon PA 12 Classic
Nylon PA12 MJF is HP’s most versatile, cost-effective, durable and high-performance Multi Jet Fusion printed material in the world of additive manufacturing.
It enables the production of both prototypes and series of functional parts, offering a true alternative to injection moulding. HP MJF media-free technology provides maximum design freedom.
Different print modes and finishes are available.
- High production capacity
- Excellent mechanical and chemical resistance
- Good dimensional stability
- 3D printing process: MJF
- Guaranteed tolerances: <100mm±0.30mm; >100mm±0.3%.
Max. format: 380 x 284 x 380 mm; 15 x 11.2 x 15 in - Production time: from 1 working day
To achieve the highest production economy without sacrificing all the features of PA12.
To give greater mechanical resistance to your parts.
Per dare maggior importanza alla qualità della finitura superficiale
The right compromise between mechanical and aesthetic modes.
The part only undergoes shot peening to remove residual print dust and thus remains opaque grey, with colouring that is not always uniform.
Colouring obtained by immersion in black solution. The piece has a uniform matt black finish with excellent aesthetic appearance
The piece undergoes an additional shot-peening treatment with graphite microspheres to make it uniform and anthracite-coloured.
Colouring obtained by immersion in black solution. The piece presents a uniform matt black finish with an excellent aesthetic appearance.
A subsequent sandblasting operation helps to finish the surface, which remains matt.
The piece then undergoes an additional shot-peening treatment with graphite microspheres to make it uniform and anthracite-coloured.
A subsequent sandblasting operation helps to finish the surface, which remains matt.
NYLON PA 12 SMOOTH
The PA12 MJF Smooth nylon is a 3D printing material that offers a smoother surface than Classic PA12 thanks to the shape of the powder particles and their distribution.
It has low reactivity, high powder density, and is capable of maintaining up to 85% powder reusability.
- High surface quality
- Excellent dimensional accuracy
- 3D Printing Process: MJF
- Guaranteed Tolerances: ±0.30 mm for dimensions less than 100 mm; ±0.3% for dimensions over 100 mm
- Max. Size: 380 x 284 x 380 mm; 15 x 11.2 x 15 inches
- Production Times: starting from 1 business day
The right compromise between mechanical and aesthetic modes.
The part only undergoes shot peening to remove residual print dust and thus remains opaque grey, with colouring that is not always uniform.
Colouring obtained by immersion in black solution. The piece has a uniform matt black finish with excellent aesthetic appearance
The piece undergoes an additional shot-peening treatment with graphite microspheres to make it uniform and anthracite-coloured.
Colouring obtained by immersion in black solution. The piece presents a uniform matt black finish with an excellent aesthetic appearance.
A subsequent sandblasting operation helps to finish the surface, which remains matt.
The piece then undergoes an additional shot-peening treatment with graphite microspheres to make it uniform and anthracite-coloured.
A subsequent sandblasting operation helps to finish the surface, which remains matt.
Nylon PA 12 White
Printing with HP MJF technology in white PA12 nylon. Possibility to achieve uniform and vivid surface colour by immersion process (optional)
- High print quality
- Possibility of colouring
- Good mechanical and chemical resistance
- Good dimensional stability
- Processo di stampa 3D: HP MJF
Tolleranze garantite: <100mm±0,30mm; >100mm±0,3%
Formato Max: 332mm x 190mm x 248mm - Tempi di produzione: 7+ giorni lavorativi, 5 giorni lavorativi (su richiesta)
Nylon PA 12 Multicolor
Print with HP 580 MJF Color 3d printer, the resistance of PA12 with the possibility of printing any color and texture (photos, writings, graphics, logos…).
- High quality printing directly in full color without further steps
- Good mechanical and chemical resistance
- Good dimensional stability
- 3D printing process : HP MJF
- Guaranteed tolerances: <100mm±0.30mm; >100mm±0.3%
- Max format: 332mm x 190mm x 248mm
- Production time: 7+ working days, 5 working days (on request)
Nylon PA 12 GB
The PA12GB nylon is added to 40% glass microspheres which give it greater rigidity, resistance to wear and heat.
It allows you to produce both prototypes and series of functional parts, offering itself as a real alternative to injection molding. HP MJF medialess technology provides maximum design freedom.
Different printing modes and finishes are available.
- Greater rigidity
- Better thermal performance
- Greater wear resistance
- 3D printing process: MJF
- Guaranteed tolerances: <100mm±0.30mm; >100mm±0.3%
- Max. format: 380 x 284 x 380 mm; 15 x 11.2 x 15 in
- Production times: starting from 5 working days
To obtain greater production economy without giving up all the features of PA12.
To give greater mechanical resistance to your pieces.
To give greater importance to the quality of the surface finish
The right compromise between mechanical and aesthetic modes.
The piece is only subjected to shot peening to remove residual printing dust and therefore remains opaque grey, with a color that is not always uniform.
Coloring obtained by immersion in black solution. The piece has a uniform matte black finish with excellent aesthetic appearance.
The piece undergoes a subsequent additional shot peening treatment with graphite microspheres which makes it uniform and anthracite in colour.
Coloring obtained by immersion in black solution. The piece has a uniform matte black finish with excellent aesthetic appearance.
A subsequent sandblasting operation helps to refine the surface, which still remains opaque.
The piece undergoes a subsequent additional shot peening treatment with graphite microspheres which makes it uniform and anthracite in colour.
A subsequent sandblasting operation helps to refine the surface, which still remains opaque.
Nylon PA 11
PA11 MJF nylon printed with HP’s Multi Jet Fusion technology is a durable and environmentally friendly material, with high wear resistance and low friction. It also offers good resistance to many chemical products.
It allows you to produce both prototypes and series of functional parts, offering itself as a real alternative to injection molding. HP MJF medialess technology provides maximum design freedom.
Different printing modes and finishes are available.
- High production capacity
- Excellent mechanical and chemical resistance
- Ecological and produced from renewable resources
- 3D printing process: MJF
- Guaranteed tolerances: <100mm±0.30mm; >100mm±0.3%
- Max. format: 380 x 284 x 380 mm; 15 x 11.2 x 15 in
- Production times: starting from 5 working days
To obtain greater production economy without giving up all the features of PA12.
To give greater mechanical resistance to your pieces.
To give greater mechanical resistance to your pieces.
The right compromise between mechanical and aesthetic modes.
The part only undergoes shot peening to remove residual print dust and thus remains opaque grey, with colouring that is not always uniform.
Colouring obtained by immersion in black solution. The piece has a uniform matt black finish with an excellent aesthetic appearance.
The piece undergoes an additional shot-peening treatment with graphite microspheres to make it uniform and anthracite-coloured.
Colouring obtained by immersion in black solution. The piece presents a uniform matt black finish with an excellent aesthetic appearance.
A subsequent sandblasting operation helps to finish the surface, which remains matt.
The piece then undergoes an additional shot-peening treatment with graphite microspheres to make it uniform and anthracite-coloured.
A subsequent sandblasting operation helps to finish the surface, which remains matt.
316 STAINLESS STEEL
3D printing in AISI316L stainless steel is produced via the LPBF (laser fusion powder bed) process which allows for extremely precise and resistant finished parts to be obtained, which do not require further sintering/hardening steps in high temperature ovens. This technology requires the presence of supports during printing, which, optionally, can be subsequently removed by us or by the end customer. The finish of the material is matte/sandblasted.
- Good corrosion resistance
- High tensile strength, good strength and rigidity
- Excellent dimensional accuracy
- Possibility of geometries not achievable with CNC technology
- 3D Printing Process: LPBF
- Laser Spot: 40µm
- Layer: 20µm
- Max format: 150x150x150 mm
- Production time: 7+ working days, 5 working days (on request)
- Fast standard printing
- Mechanical top print
- Aesthetic print
- Premium balanced print
ALUMINUM
3D printing in AlSi10Mg Aluminum is produced via the LPBF process (laser fusion powder bed) which allows for extremely precise and resistant finished parts to be obtained, which do not require further sintering/hardening steps in high temperature ovens.
This technology requires the presence of supports during printing, which, optionally, can be subsequently removed by us or by the end customer. The finish of the material is matte/sandblasted.
- High dynamic load capacity
Simplified post-processing
Excellent dimensional accuracy
Possibility of geometries not achievable with CNC technology
- 3D Printing Process: LPBF
- Laser Spot: 40µm
- Layer: 20µm
- Max format: 150x150x150 mm
- Production time: 7+ working days, 5 working days (on request)
- Fast standard printing
- Mechanical top print
- Aesthetic print
- Premium balanced print
RESINS
Resin printing for components for aesthetic use or with particular technical characteristics and specific applications such as transparency or flexibility chosen from different grades.
- Excellent precision
- Surface finish
- Variety of materials
- 3D printing process: SLA
- Guaranteed tolerances: Varies based on part geometry
- Max format: 335 mm x 300 mm x 200 mm
- Production time: 7+ working days, 5 working days (on request)
- With supports to remove
- With supports removed at the factory by FAMA3D
TPU
It is a flexible/rubbery material printed with HP MJF technology without printing supports, which guarantees maximum design freedom.
- High production capacity
- Compact 90 shore material
- Good printing precision
- 3D printing process: HP MJF
- Guaranteed tolerances: <100mm±0.30mm; >100mm±0.3%
- Max format: 380mm x 380mm x 280mm
Production time: 7+ working days, 5 working days (on request)
Direct Extrusion
It is an innovative technology, created upon specific request of Fama3D, which allows for an extrusion speed of 20 to 50 times higher than traditional FDM technology and significantly lower costs. Large parts can thus be made at reasonable costs.
- Large prints
- Low management costs
- Possibility of using recycled materials
- 3D printing process: Direct Extrusion
Guaranteed tolerances. 5 mm nozzle - Max format: 1300x1300x1300mm on the diagonal up to 1800mm
Printing speed up to 2kg/h with 5mm nozzle - Production times: starting from 7 working days
- Direct extrusion with pellet feeding
